Car cigar lighter size connectors since 1980
|
|
Car cigar lighter size connectors since 1980 |
|
|
 |
White plastic housing. |
| Tight sealing flexible flap cover. | |
| All non-corrosive metal parts - nickel plated brass. | |
| Inside rim keeps all accessory plugs securely connected. | |
| Twin pole. | |
| Push-on blade terminals with permanent polarity marks. | |
| Weight: 26.5 g. | |
| For
installation in cabins and caravans (RVs), where it will not be
exposed to too much direct sun light.
Use the black sockets with UV stabilized caps for your applications in the sun. |
|
| The indent
in the bottom plate provides for a wider and so better contact area for
accessory plugs with sharp hot ends.
All genuine Sutars Power Outlets have bottom plates with an indent as shown here. |
|
| Click for another picture |
 |
| This socket is splashproof, well next
to watertight, when not in use. The Ø of the frontplate is only 37 mm. To fit open a 30 -32 mmØ (1 1/8 - 1 1/4 in.) hole and screw on and tighten the round nut (provided) from behind the panel. |
|
|
|
| ||||||||||||||||||||||||||||||||
