Car cigar lighter size connectors since 1980
|
|
Car cigar lighter size connectors since 1980 |
|
|
 |
|
| Black plastic housing. | |
| Tight sealing flexible UV stabilised flap cover. | |
| All non-corrosive metal parts - nickel plated brass. | |
| Inside rim keeps accessory plugs securely connected. | |
| Push-on blade terminals - disconnects. | |
| Permanent polarity (+ -) marks. | |
| Weight: 43 g. | |
|
|
| This surface
version is the Sutars compact socket
in a plastic shroud.
There are threads in the
entrance hole on the front so no need for a retainer nut. Well, suitably cut the front
will do as retainer nut, should you later decide
to recess the socket. The Plant-on Socket is the one to use when recessing is difficult. It costs a little more than a recessable Socket, but since it takes only two small screw holes to fit it and no tools for a 1 1/8 inch hole, it is very often a cheaper alternative after all. The cap can be adjusted in all directions and so the text can be read even when the socket is installed sideways on a wall. The centres of the screw holes are 44 mm apart. Screws are not included as the kind to use depends on the properties of the panel. There is also a 24V version of this socket. The only difference is that it reads 24V on the cap. The Part No is 1224. |
|
|
|
| ||||||||||||||||||||||||||||||||
